7CA 7-Channel M1 2.4GHz/ R617FS - Futaba  [7CA_C1]

Futaba 7CA 7-Channel (M1) 2.4GHz/ R617FS
Price:
NZD$500.05
Brand:
Futaba
Model:
7CA_C1
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category
Write a review
Futaba item 7CA - 7-Channel M1 2.4GHz/ R617FS Flight Transmitters System

The 7C sits squarely in the middle ground in computers. It's something that provides much of the 9C's set-up flexibility matched to 4-channel ease. As with any the non-public computer systems with this particular page, it provides Dial n' Key ease for development, plus the 2.4GHz FASST system for an unparalleled RF hyperlink.

QUALITIES:

  • Available with 4 S3152 electronic high-torque servos (FUTK7000/7001); 4 S3004 ball bearing servos (FUTK7002); or 4 S3001 ball bearing servos (FUTK7003)
  • Dial 'n KeyTM programming
  • Airplane pc software
  • Assignable switches/functions
  • Up/down timer
  • Mode 1-4 selectable (modes 3 and 4 available via transmitter computer software)
  • Big 72 x 32 LCD display with adjustable contrast
  • 10-model memory
  • 6-character model naming
  • Digital trims, trim memory, EPA, subtrims and servo reversing (all sites)
  • Dual/Triple rates* (aileron/elevator/rudder)
  • Exponential (aileron/elevator/rudder)
  • Adjustable throttle cut
  • Fail-safe
  • Trainer system (cable required)
  • Flap switch
  • Retract switch
  • Adjustable rate knob (channel 6)
  • Airplane Advanced Menu:
  • Ailevator function simplifies twin servo set-ups on elevators
  • 3 programmable mixes
  • Flaperon
  • Flap trim
  • Air stopping system
  • Elevator to flap blending
  • V-tail mixing
  • Elevon combining
  • Aileron to rudder mixing
  • Snap roll

INCLUDES:

  • Futaba 7C 2.4Ghz Transmitter
  • NT8F600B 9.6V 600mAh Transmitter Battery
  • R617FS Receiver

SPECS:

Transmitter:

  • Os: 2-stick, 7 networks
  • energy: 9.6V NT8S600B Ni-Cd battery
  • Present Drain: 250 mA

Receiver:

  • Size: 41.6 x 27.5 x 9.2 mm
  • Energy Requirement: 4.8 - 6V
  • Current Drain: 80mA (at no signal)
  • Body fat: 0.34oz (9.8g) with instance, 0.25oz (7g) without example

Copyright © 2008-2024 rcjaz.co.nz All rights reserved