M12S 2.4w/RX-481 + RX482, battery & charger - Sanwa  [SW-M12S-481-2]

This is often an Airtronics M12S Super 2.4GHz FH4T 4-Channel Digital High-Response Telemetry System with Advanced Programming and SSL Help. This excellent M12S Super features its own groundbreaking features that set it along with the initial M12, which makes it the "must have actually in reality" radio system for competition motorists anyway quantities.

Feature:

• 30per cent faster Response Time versus Original M12 - It's the Fastest broadcast in the world, Period!
  
• Telemetry Mixing enables you to Mix Telemetry information and Telemetry Alerts to various Stations
  
• Telemetry Assign Allows Exterior device to obtain in contact and Control various Transmitter Functions
  
• BASIC Menu Simplifies Transmitter use - truly change Between FUNDAMENTAL and STANDARD Menus
  
• Enhanced CODE AUX Function Allow Naming and help all the way to 10 various Functions
  
• Model Template Function enables you to efficiently build Complicated Models
  
• Includes Lightweight, 4 mobile AA size Battery Tray
  
• Adjustable Trigger Lever to Personalized Fit Your Finger Size
  
• Steering Wheel Offset Bracket Enables Expanded individualized Changes
  
• Enhanced Vibration Alerts and Customizable Vibration Levels
  
• Improved LCD with Optional White or Blue Background Colors
  
• Earphone Jack enables you to Hear Alerts and Alarms Without Outside noise Interference
  
• Expanded Ackerman Function
  
• Expanded Timer/Alarm Functions, Including fresh Countdown Timer
  
• Throttle slowly Monitors the Transmitter's Voltage and Closes the Throttle to Alert that you Recharge
  
• Reaction Mode LEDs to See current Throttle and Steering Response Modes immediately
  
• Expanded Racing Mode Function

M12S Super Transmitter Specifications:

• Manufacturing energy: 100mW
  
• Nominal Input Voltage: 4.8 to 7.4v (6.6v Default)
  
• Running Voltage volume: 4.0 to 9.0v
  
• Frequency: 2.4GHz FHSS
  
• Modulation Type: FH3 or FH4T (individual Selectable) - doesn't help FH2 Modulation

RX-481 Internal Antenna, FHSS-4 Surface 4ch Receiver Specifications:

• Frequency 2.4GHz FH3/FH4T Selectable Via Transmitter
  
• Nominal Input Voltage 4.8 to 7.4 Volts (4-6C NiCD/MH, 2S lifetime or 2S LiPo)
  
• body fat 0.25oz (7.1g)
  
• dimensions 0.71 x 0.96 x 1.06in (18.2 x 24.4 x 27.1mm)
  
• Battery Fail secure Limit 3.5 to 5.0 Volts (FH3) / 3.5 to 7.4 Volts (FH4T)

RX-482 Internal Antenna, FHSS-4/SSL Surface 4ch Receiver Specifications:

• Frequency 2.4GHz FH4T Selectable Via Transmitter
  
• Nominal Input Voltage 4.8 to 7.4 Volts (4-6C NiCD/MH, 2S life or 2S LiPo)
  
• Fat 0.25oz (7.1g)
  
• Dimensions 0.71 x 0.96 x 1.06in (18.2 x 24.4 x 27.1mm)
  
• Battery Fail secure Limit 3.5 to 7.4 Volts (FH4T)

Attention:

• In the event that you're using Analog servos within model, avoid the SHR or SSR Channel reaction Mode for a number of internet sites. Utilize NOR Channel response Mode with Analog servos. Using SHR or SSR Channel effect Modes with Analog servos might lead to bad performance and sometimes even dilemmas for the servos and/or the receiver. SHR and SSR Channel response Modes in case you have to be precisely utilized in combination with Digital servos. As the SHR Channel effect Mode may be employed with virtually any Digital servo, the SSR Channel reaction Mode should just be used with Airtronics or Sanwa Super reaction SRG Digital servos. Not all ESCs are suitable for SHR or SSR Channel impact Modes. When your ESC won't run correctly, change the Throttle Channel response Mode to NOR. SSR Channel response Mode is in fact available whenever utilized in combination with appropriate FH4 or FH4T Super response receiver.
• simply take notice your Nominal Input Voltage is 4.8 to 7.4v, consequently this transmitter won't be right for 2S LiPo. If users need to change the AA Sized electric batteries tray to a battery pack, please select a battery power that is to be that voltage range.