84191 RC Team Lotus 99T Honda F103 Chassis [Limited Edition] - Tamiya 1/10  [84191]

• Nakajima's Ride:Team Lotus 99T Honda originated to compete in 1987 F1 duration and showcased a computer-controlled Active Suspension system and a robust Honda V6 turbo motor which believed to have an output of over 1,000hp. With Ayrton Senna and the initial Japanese F1 motorist, Satoru Nakajima, at helm, the 99T Honda took victories through the Monaco and Detroit GPs through the period. This 1/10 scale R/C construction kit faithfully reproduces the memorable Lotus 99T Honda. The easy, ground-hugging body is made with polycarbonate even though the included stickers depict the No.11 vehicle driven by Nakajima. The direct drive 2WD F103 framework has high-grip sponge tires and features razor-sharp maneuvering faculties.
• Direct Drive 2WD F103 Chassis:The F103 chassis features a lightweight, durable semi-double deck framework laden with 1.5mm dense top and 2.5mm thick reduced FRP dishes. Front split kingpin/coil spring and a rear rigid 3-point suspension system system system setup offer superior managing performance. The extremely efficient direct drive 2WD features the motor pinion straight attached to the spur gear including an integral ball differential. Gear example has 1060 ball bearings and 5 different ground approval settings are feasible.

Specs and Features:

• Length: 405mm Width: 200mm Height: 107mm weight: 660g
• Wheelbase: 260mm Tread: 170mm (front component), 155mm (Rear)
• Tire Width/Diameter: 30/59mm (Front), 45/64mm (Rear)
• FRP Semi-Double Deck Frame
• Horizontally-Mounted Motor with right back Direct Drive 2WD
• Ball Differential
• Isometric 2-Piece Steering Tie-Rod
• Suspension: Kingpin/Coil Spring (front side), T-Bar Rigid (Rear)
• Gear Ratio=3.70:1 (whenever utilized in combination with 17T pinion/63T spur gears)
• Type 540 Motor
• Requires electronic rate controller (provided separately)