10x4 APC AP1004 RC Aircraft Propeller  [AP1004]

APC PROPELLER 10x4
Price:
NZD$7.72
Brand:
APC
Model:
AP1004
Condition:
Brand New
Write a review

Propeller purpose and fitment

This APC AP1004 PROPELLER 10x4 is produced as a model aircraft prop, using the 10x4 dimension to match common mounting standards and aerodynamic expectations for small to medium electric powerplants.

The write up emphasises practical fit, inspection pointers, and the effect of prop selection on thrust and motor load without marketing claims. Always check shaft diameter and spinner clearance as part of your preflight checks.

Installation notes: balance the prop on a balancer, fit with the correct nut or hub adapter for your motor, and confirm there is ample clearance from the fuselage or cowling through the prop arc.

Tuning role: the 10x4 blade generally increases static thrust versus higher pitch choices while keeping current draw manageable for compatible motors and ESCs; make incremental prop changes when tuning climb or cruise behavior.

Will this prop handle regular training and sport flying?

Under normal operation a plastic prop of this style is suitable for regular flying, but avoid hard impacts and inspect after any ground strikes. Replace the prop if you find chips or deformation.

How do I inspect the blade for safe service?

Look for hairline cracks, nicks at the leading edge, or warped blades. Even small defects can create vibration; retire the prop if any structural damage is detected.

Are hub adapters commonly required?

Yes, matching the prop hub to your motor shaft often needs a simple adapter or collet. Confirm shaft size and select the appropriate hub or adapter to ensure a secure fit.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved