11.1V Gensace 1950mAh LiPo for Kyosho GAB2303 (XT60H-F)  [KY-GAB2303]

Kyosho GAB2303 - Gensace LiPo 1950mAh (30C/11.1V/??????/XT60H-F)
Price:
NZD$0.00
Brand:
Kyosho
Model:
KY-GAB2303
GTIN:
4548565525744
Write a review

RC battery overview and electrical specs

The Kyosho GAB2303 Gensace LiPo 1950mAh is specified for hobby electric models accepting an 11.1V supply with an XT60H-F discharge connector. The listing states the core electrical figures: nominal voltage 11.1V, capacity 1950mAh, and a 30C continuous discharge rating, which describe expected run time and voltage response but do not include cell count or physical measurements.

Installation is generally simple on chassis that accept 11.1V packs and an XT60H-F plug, however check battery bay clearance and connector routing before final fitting. Secure the battery with the vehicle's strap or a low-compression bracket and keep the lead away from moving parts to prevent snags or damage.

From a setup perspective the pack offers a balance between runtime and weight for club sessions; the 30C rating provides steady voltage under moderate loads. Small shifts in pack position will alter front/rear balance and can be used to refine handling without changing shock or drivetrain settings.

Charge and maintain the pack using standard LiPo practice: use a compatible charger, employ balance-charge cycles when available, store at the recommended storage voltage, and inspect for swelling or damage before and after use. Do not attempt cell repairs and dispose of the battery according to local guidelines.

Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
The pack is supplied with an XT60H-F connector; adapters exist but ensure any modification preserves correct polarity and secure connections. If unsure, seek a qualified soldering or connector service.
It can replace other 11.1V packs provided the connector, capacity and the physical envelope match your chassis. Measure the battery bay and consider weight balance before committing to a swap.
Select the 3S (11.1V) setting on your LiPo-capable charger and use balance-charge if available. Use a conservative charge current for older or unknown-condition packs.
The 1950mAh capacity gives a compromise between weight and run time; the 30C rating limits voltage sag under load. Changes to capacity or pack position influence weight distribution and will affect handling and throttle feel.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved