1/12 Yokomo C-CQ0605A Monster Wheel 2.2x2.4 (White) for Off-Road RC  [C-CQ0605A]

Yokomo C-CQ0605A Monster truck wheel (White) 2.2 x 2.4
Price:
NZD$18.78
Brand:
Yokomo
Model:
C-CQ0605A
GTIN:
0639342184545
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Technical notes for Yokomo C-CQ0605A

The Yokomo C-CQ0605A is an RC-scale replacement wheel tailored to 1/12 monster truck duty and supplied as a matched front/rear set. The white finish and 2.2 x 2.4 sizing correspond to the wheel footprint fitted to several 1/12 2WD RTR monster truck kits.

Fitment advice: this wheel is intended as a straightforward replacement for worn or OEM rims and will have an effect on tyre choice, ride height and handling feedback. During installation check hex and hub compatibility with your chassis, confirm tyre seating, and do a roll-out test before tightening completely to avoid binding.

Practical installation steps: use the correct hex driver to remove old wheels, inspect hub clearance on both sides, tighten fasteners evenly, and take a short drive to confirm there is no contact with suspension or steering links. Swapping to this wheel size may change gearing and ground clearance, so reassess drivetrain and body clearance once fitted.

Included in the pack

  • Wheel set - 2 pcs

Fits these models

  • CE-8912 1/12 2WD RTR Monster Truck Fiat Abarth 595
  • CE-8936Y/8937BL 1/12 2WD RTR Monster Truck Suzuki Jimny
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What tools do I need to change these wheels?

A matching hex driver for your wheel nuts is required; have pliers and a torque-aware driver handy to ensure even tightening and correct seating of the tyre bead.

Will I need to alter gearing after fitting these wheels?

Possibly. The change in wheel diameter and tyre profile can affect effective gearing and top speed; test and adjust pinion or differential settings if required.

Can I use standard tyres on these rims?

Yes, most 1/12 tyre options that match a 2.2 width will seat correctly, but always check bead alignment and tyre profile to avoid rubbing or fitment issues.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved