12x6 Wooden 3-Blade Prop for RC Aircraft Bolly BL3L1206  [BL3L1206]

BOLLY WOODEN PROPELLER 12x6 3-BLADE
Price:
NZD$21.81
Brand:
Bolly
Model:
BL3L1206
Condition:
Brand New
Write a review

12x6 Hardwood Three-Blade Propeller Details

The Bolly BL3L1206 wooden propeller is crafted for RC scale and sport planes using three-blade configurations. Its 12x6 designation indicates the blade diameter and pitch, and the three-blade layout alters thrust delivery and noise compared to two-blade alternatives.

To fit the propeller, place it on your model's prop shaft and secure it with the existing prop nut or spinner parts. Verify blade clearance from the airframe and landing gear, and tighten to achieve a secure, wobble-free installation.

Routine maintenance emphasises balance and surface checks. Inspect for delamination or damage before each flight and make small sanding adjustments to correct static imbalance. Good balance lowers vibration and keeps flight characteristics predictable.

This item is offered as an RC spare part for appropriate models and should only be used with compatible hardware and within safe speed ranges.

How do I ensure the Bolly BL3L1206 seats correctly on my shaft?

Make sure the prop hub matches the shaft diameter and that it slides on without forcing. Tighten the prop nut or spinner assembly evenly and check for axial play; the prop should not wobble on the shaft.

What steps are recommended during initial installation?

Fit the prop, check clearance, tighten hardware, then perform a slow spin test while restrained to confirm there is no rubbing or vibration. Reinspect after a short test run and retorque if necessary.

Are any special tools required to mount this wooden prop?

No special tools are needed beyond the standard spanner or nut driver used for your model's prop nut or spinner. Use common sense and the correct size wrench to avoid damaging the hub.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved