3Racing GRAP-2040 Woven Graphite Sheet 450 x 600mm  [GRAP-2040]

3RACING 4.0mm Woven Graphite Plate (4.0 x 450 x 600mm) - GRAP-2040
Price:
NZD$390.73
Brand:
3Racing
Model:
GRAP-2040
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Build Lighter, Build Stronger with 3Racing GRAP-2040

Supplied as a 450 x 600mm panel at 4.0mm thickness, the 3Racing GRAP-2040 gives scratch builders a dimensionally stable material for plates, trays and custom mounts.

Practical Uses for the GRAP-2040

The woven construction offers a balance of stiffness and low mass, ideal for servo trays, battery bays and wing mounts. Its size is convenient for making several small parts or one large structural element.

Specifications

  • Thickness: 4.0mm
  • Dimensions: 450 x 600mm
  • Material: Woven Graphite

As a stable, easy to machine sheet, the 3Racing GRAP-2040 is a smart material choice for hobbyists who prefer to shape and tune their own components.

What adhesives work best with the GRAP-2040?

Epoxy systems and structural CA are commonly used; roughen mating faces slightly for better mechanical adhesion before bonding.

Can I paint or finish the surface?

Yes, light sanding and a suitable primer will allow paint to adhere, though many builders prefer a clear finish to show the weave.

Will the plate fit typical RC car chassis layouts?

The generous 450 x 600mm size lets you cut plates for most car chassis and multi-project use, so you can lay out parts to minimise waste.

Any tips for routing or drilling?

Use carbide or high speed bits, cut at moderate feed rates, and support the sheet to reduce edge chipping when drilling or routing.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved