3RACING 3RB-MR106-2RS/2 6x10x3mm Double Rubber Seals Bearing Pair  [3RB-MR106-2RS/2]

3RACING Double Rubber Seals Bearing 6 x 10 x 3 mm (2 pcs) - 3RB-MR106-2RS/2
Price:
NZD$2.77
Brand:
3Racing
Model:
3RB-MR106-2RS/2
Condition:
Brand New
Write a review

Stable Rotation with 3RACING 3RB-MR106-2RS/2 Bearings

The 6 x 10 x 3 mm 3RACING double rubber sealed bearing provides steady, low-friction operation for wheel hubs, gearboxes, and small rotating parts. Its compact form factor makes it a handy replacement for routine maintenance or upgrades on common RC platforms.

Why Use Sealed Bearings on Your Model

Sealed bearings such as the 3RACING 3RB-MR106-2RS/2 lock out contaminants better than open bearings, helping to preserve lubricant and reduce wear. That makes them practical for mixed-surface running where dust and moisture are present.

Installation and Maintenance Notes

Ensure the bearing seat is free of burrs and grit before fitting the 6x10x3mm unit, and press the bearing in evenly to protect the seal. Regular inspections and swapping worn bearings will keep drive and steering parts feeling precise.

Will these fit typical hub carriers on 1/10 cars?

Most 1/10 scale hub carriers accept 6x10x3mm bearings, but check your model's manual for bore diameter and width to confirm compatibility.

Are these bearings pre-lubricated?

Yes. Sealed bearings usually come with factory lubrication sealed inside, so they are ready to use out of the package.

How do I tell when they need replacing?

Replace bearings if you feel rough spots, audible grinding, or increased play in the wheel or gearbox assemblies during running.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved