Yokomo B8-RTC-02 RTC Rear Toe Control Arm 54mm 40.5mm  [B8-RTC-02]

Yokomo B8-RTC-02 54mmxShock40.5mm RTC Sus-Arm for BD-8
Price:
NZD$8.78
Brand:
Yokomo
Model:
B8-RTC-02
GTIN:
3888
Condition:
Brand New
Write a review

Overview of the B8-RTC-02 for BD8

The Yokomo B8-RTC-02 is intended for racers fitting the RTC rear toe system to BD8 or BD7 2016 cars. Produced in graphite resin, the arm balances a low mass with the rigidity needed for consistent cornering.

Dimensions and Alignment Notes

This arm is built for the BD8 chassis family, with a 54mm gap between inner and outer suspension pins to preserve geometry. The inner pin to shock mount measures 40.5mm, which helps maintain stable shock leverage and chassis balance at speed.

Supported Chassis Models

  • MRTC-BD8-P
  • MRTC-BD8AP
  • MRTC-BD8
  • MRTC-BD8A
  • MRTC-BD8SV
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is installation difficult for club racers?

Installation follows the RTC kit instructions; basic tools and patience are required but the process is straightforward for anyone familiar with suspension swaps.

Will this arm affect corner entry grip?

Because the part is stiffer than standard arms, you may notice crisper initial turn-in. Tune toe and shock settings to find the right balance for your surface.

Can I run this arm with my existing shocks?

Yes, the 40.5mm inner pin to shock mount dimension is standard for compatible BD8 shocks, so most stock and aftermarket shocks that fit BD8 will work.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved