59ml Arrowmax am-210020 5,000cst Silicone Diff Fluid  [am-210020]

Arrowmax Silicone Diff Fluid 59ml 5.000cst
Price:
NZD$0.00
Brand:
Arrowmax
Model:
am-210020
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Diff fluid for precise traction control

The Arrowmax am-210020 silicone diff fluid supplies 59ml of 5,000cst oil intended for installation inside RC differential housings to refine traction and cornering balance. This higher viscosity helps teams and hobbyists tighten diff response on electric 1/10 models.

Apply this fluid during diff rebuilds or whenever you want to shift handling toward reduced inside-wheel spin. Maintain consistent procedures for filling and bleeding to ensure reliable comparisons between runs.

  • Application: fill the diff case to the recommended level for your diff type, avoid air pockets for consistent behaviour.
  • Tuning role: higher cst values increase internal resistance and can reduce inside-wheel spin under power, lower values allow freer differential action.
  • Handling and storage: keep cap sealed and store upright away from extreme heat, and use a clean syringe or applicator to prevent contamination.

Specifications

  • Item: Arrowmax Silicone Diff Fluid
  • Model Number: am-210020
  • Volume: 59ml
  • Viscosity: 5,000cst
  • Type: Silicone oil for RC differentials

Treat this product as a precision consumable and use calibrated tools and repeatable methods when adjusting diffs for consistent lap times.

A higher-viscosity fluid like 5,000cst increases internal drag, which can stabilise the car through corner entry by limiting differential action, often reducing sudden inside-wheel spin.
Rotate the diff while slowly injecting fluid and gently tap the case to encourage bubbles to surface. Continue until the fluid level is correct and no bubbles are visible after several rotations.
It is suitable for most sealed and gear diffs designed for silicone oils, but always verify recommended levels and seals for your specific diff style before filling.
Use a clean syringe or calibrated dropper to measure and inject the fluid accurately. Keep spare caps and store bottles upright to prevent leakage and contamination.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved