AE86 Levin 2-door LED lighting kit - Yokomo SD-AE86L2L  [SD-AE86L2L]

Yokomo SD-AE86L2L jp
Price:
NZD$68.47
Brand:
Yokomo
Model:
SD-AE86L2L
GTIN:
639342231898
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $62.25 each $12.44 or 9%
3+ $56.01 each $37.38 or 18%
Write a review
alt="Yokomo SD-AE86L2L jp" title="Yokomo SD-AE86L2L jp"
alt="Yokomo SD-AE86L2L jp" title="Yokomo SD-AE86L2L jp"
alt="Yokomo SD-AE86L2L jp" title="Yokomo SD-AE86L2L jp"
alt="Yokomo SD-AE86L2L jp" title="Yokomo SD-AE86L2L jp"

Scale-accurate front lamps for AE86 Levin

The Yokomo SD-AE86L2L LED light set is created to reproduce authentic front lighting for the AE86 Levin 2-door RC body, converting the original-style lamp mounts into illuminated LEDs (body not supplied).

Included are multiple bulb tone packs so builders can match the aged factory look: bulb color ×4 lights, red ×4 lights, yellow ×4 lights. The selected front bulb tone aims to match the slightly weathered appearance of the real car for display or low-light running.

Installation is direct: LEDs attach to the body’s light bracket and then connect into your model’s scale wiring or an LED controller. The product is targeted at cosmetic detailing rather than electrical changes to propulsion components.

Specifications

  • Item Yokomo SD-AE86L2L LED light set for AE86 Levin 2-door
  • Material LED
  • Model Number SD-AE86L2L
  • Compatibility SD-AE86L2B / DP-RS13SP / DP-FCBN

Compatibility

  • SD-AE86L2B
  • DP-RS13SP
  • DP-FCBN

Modelers seeking period detail will find the SD-AE86L2L easy to integrate, providing authentic lighting effects while keeping the vehicle’s mechanical systems unchanged.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I mount the LEDs to my AE86 body?

Mount the LEDs directly to the body’s light bracket as intended. The body must include its light bracket because the kit does not provide that part.

Are any wiring instructions provided?

Basic wiring guidance is included conceptually; connect the LED leads to your model’s scale lighting outputs or to an LED controller following standard polarity and voltage practices.

Do I need soldering to fit these LEDs?

Some builders prefer soldering for permanent connections, but depending on your setup you can use connector blocks or crimp fittings to secure the LED wiring.

Can I swap bulb tones after installation?

Yes, the kit includes separate bulb colour groups so you can change tones before final assembly to achieve the desired period look.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved