Aizu Project 2001-6 2.0mm Micron Tape - Ideal for intricate RC detailing (5m)  [AIZ-2001-6]

Aizu Project 2001-6 - Micron Masking Tape 2.0 mm x 5m
Price:
NZD$8.26
Brand:
Aizu Project
Model:
AIZ-2001-6
GTIN:
4528403901299
Condition:
Brand New
Available in warehouse
Write a review

Fine-line tape for scale model finishing

The Aizu Project 2001-6 Micron Masking Tape supplies a narrow 2.0 mm width on a 5 m roll, designed for delicate paint tasks on RC kits and shells. It helps you work on small graphics and tight joins.

Control paint edges and reduce bleed

This tape performs well at keeping paint lines sharp and limiting bleed into adjacent areas. Its narrow gauge is suited to both straight trim and tight radii on vehicle bodies.

Practical handling tips

  • Surface Preparation: Clean surfaces with a dry cloth or isopropyl wipe to improve adhesion.
  • Application Technique: Lay short lengths and rub down the tape edge to prevent paint seepage.
  • Removal Guidance: Lift the tape slowly and steadily to avoid tearing fresh paint or leaving tack behind.
Yes, the slim width bends around small curves more easily than wider tapes, making it useful for complex shapes.
It works with common model finishes including acrylic and enamel paints. Test on a scrap piece first to confirm adhesion.
Short periods are best. Remove tape within a few days to avoid stronger adhesion that can lift paint when peeled.
The tape offers small flexibility but does not stretch much. For very tight bends, use short overlapping pieces for a smooth line.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved