Aluminum Front Knuckles Compatible with TAMIYA TA02 TA03 FF01 CC01 JR-TA201-GU by Jazrider  [JR-TA201-GU]

Gunmetal front knuckle uprights

This gunmetal-finished aluminum front knuckle upright set is made for TAMIYA TA02, TA03, FF01 and CC01 chassis and carries the model code JR-TA201-GU. The parts are intended as replacement front steering knuckles for the specified TAMIYA models. Intended use is for scale RC modelling only.

Fitting these uprights is a standard hobby task: remove the original knuckles, transfer over ball studs and bearings, mount the uprights to the steering points and secure them with the original screws. No specialist tools are required beyond common hobby tooling. Always check alignment after assembly to ensure smooth steering operation.

From a durability perspective the aluminum uprights reduce the flex common to many stock plastics and help preserve steering geometry during high-load runs. Use them when you need a tougher front mounting solution or are replacing fatigued plastic knuckles, and match them with clean bearings and correct geometry settings for optimum performance.