Yokomo BD-415A00 0 degree Rear Hub Carrier for BD7/BD5  [BD-415A00]

Yokomo BD-415A00 Aluminum Rear hub carrier 0degreefor bd7/BD5
Price:
NZD$24.73
Brand:
Yokomo
Model:
BD-415A00
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - BD5 category
Write a review

Aluminium replacement hub carrier for BD7 and BD5

The BD-415A00 is an aluminium replacement rear hub carrier for touring chassis that maintains the factory 0 degree toe-in layout while offering increased rigidity over the original part. It is intended to influence rear compliance and balance without changing the baseline toe setting.

Installation notes: fit this carrier as a direct replacement using the original mounting holes and hardware locations provided for the 0 degree unit. Before final tightening, verify suspension arm position and wheel hex engagement. Apply thread locker to fasteners where needed and follow your chassis maker’s torque values.

Tuning role: by preserving the stock toe and raising stiffness at the hub, the carrier can help stabilise the rear under heavier loads, reducing unexpected rear flex during fast cornering. Combine with other carriers or arm mount positions to explore different roll and toe interactions.

Package contents

  • Aluminum rear hub carrier - 2 pcs

Compatibility

  • DP-DIB2
  • DP-DIB2R
  • DP-DIB2A
  • DP-DIB2RA
  • DP-DIB
  • DP-DIBR
  • DP-DIBG
  • DP-DIBRS
  • DP-DIBL
  • DP-DIBLR
  • DP-DIBLG
  • DP-DIBRSB
  • MRTC-BD7RS
  • MRTC-BD715B
  • MRTC-BD715O
  • MRTC-BD715S
  • MRTC-BD716
  • MRTC-BD716H
  • MRTC-BD716O
  • MRTC-BD716S
  • MRTC-BD7RS2
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Do I need to modify my chassis to fit this carrier?

No chassis modification is required. The BD-415A00 uses the same mounting points and hardware orientation as the original 0 degree carrier for the compatible models listed.

What should I check during installation to ensure correct alignment?

Confirm suspension arm alignment and wheel hex seating, tighten fasteners in stages while checking toe and roll alignment, and apply thread locker to prevent loosening under load.

Are there recommended torque values or tools for fitting this carrier?

Use the torque figures recommended by your chassis manufacturer and standard RC hand tools. A balanced progressive torque approach and thread locking compound will ensure reliable fitment.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved