AM Honeycomb Chassis Battery Mounting Kit - Arrowmax AM-950043  [AM-950043]

Battery mounting interface tailored to AM Honeycomb Chassis

The Arrowmax AM-950043 battery holder set is a purpose-built RC accessory that secures battery packs to the AM Honeycomb Chassis. This overview stays functional and technical, detailing fit verification, installation approach, and how the part interacts with chassis balance.

The product is intended for the AM Honeycomb Chassis layout, so double-check the tray dimensions and mounting boss positions before fitting. Routine checks should include matching screw hole locations to chassis bosses, confirming the battery sits flat on the tray, and ensuring connectors and leads have sufficient clearance from surrounding parts.

To install, place the holder into the battery area, line up the holes, and tighten fasteners in stages to maintain even pressure. Use the built-in chassis mounts; if a slight alignment tweak is required, reposition the pack and tighten incrementally. The holder functions as a mounting interface and will influence battery placement relative to the chassis centreline.

Adjusting battery position will shift the centre of gravity and can change vehicle behaviour. Use small fore-aft or lateral moves to dial in handling. When switching battery types or capacities, re-check fit and secure the pack to prevent unwanted movement while running.

Arrowmax AM-950043 is designed as an aftermarket battery holder for the AM Honeycomb Chassis to improve pack security and aid fine tuning; verify compatibility before final fitting.