Aoshima 20253 - Nissan S15 Silvia '99 1/24 Air Suspension Custom Display Kit  [AO-20253]

Aoshima 20253 - 1/24 Nissan S15 Silvia \'99 Air Suspension Custom The Tuned Car #105
Price:
NZD$44.91
Brand:
Aoshima
Model:
AO-20253
GTIN:
4905083202531
Condition:
Brand New
Available in shop
Write a review
alt="Aoshima 20253 - 1/24 Nissan S15 Silvia \'99 Air Suspension Custom The Tuned Car #105" title="Aoshima 20253 - 1/24 Nissan S15 Silvia \'99 Air Suspension Custom The Tuned Car #105"
alt="Aoshima 20253 - 1/24 Nissan S15 Silvia \'99 Air Suspension Custom The Tuned Car #105" title="Aoshima 20253 - 1/24 Nissan S15 Silvia \'99 Air Suspension Custom The Tuned Car #105"
alt="Aoshima 20253 - 1/24 Nissan S15 Silvia \'99 Air Suspension Custom The Tuned Car #105" title="Aoshima 20253 - 1/24 Nissan S15 Silvia \'99 Air Suspension Custom The Tuned Car #105"
alt="Aoshima 20253 - 1/24 Nissan S15 Silvia \'99 Air Suspension Custom The Tuned Car #105" title="Aoshima 20253 - 1/24 Nissan S15 Silvia \'99 Air Suspension Custom The Tuned Car #105"

Nissan S15 Silvia '99 by Aoshima 20253 - 1/24 scale lowered custom

This 1/24 plastic kit recreates a modified 1999 Nissan S15 Silvia, modelled to present an air-suspension lowered silhouette and exterior tuning found in the Tuned Car line.

The S15 replaced the S14 late in the 1990s as Nissan's rear-wheel-drive sports coupe. Launched in 1999 for the Japanese domestic market, it featured refreshed styling and a focus on handling balance. The chassis became popular with hobbyists and tuners, often receiving suspension, aerodynamic, and wheel upgrades.

The subject places emphasis on exterior cues typical of air-suspension builds: pronounced lowered ride height, fitted bumpers and skirts, and tight wheel tuck. During build, pay careful attention to body-to-chassis alignment and wheel-arch clearance to maintain the intended low stance. Smooth surface prep, accurate seam removal, and careful masking are key to achieving the flat, show-quality finish expected for this kit.

Decal and trim choices depend on your display goals; many modellers opt for subtle wheel and brake weathering while keeping the body clean for a show-car presentation. Consider aftermarket 1/24 upgrades like wheels or etched parts to refine scale realism, but always double-check dimensions and hub fittings before installing.

Specifications

  • Scale: 1/24
  • Assembly: Plastic model kit, multi-part assembly

Well suited to builders aiming for a display-ready tuned street car, with emphasis on stance, paint finish, and wheel fitment.

Inspect seams and panel alignment first; proper filling and sanding are important to keep the lowered profile clean. Masking areas around tight wheel arches is also recommended before priming.
The kit is engineered to depict a lowered air-suspension look, though some builders choose minor trimming or re-spacing of wheel hubs to perfect the wheel tuck and clearance.
Aftermarket photo-etched parts and resin upgrades can increase realism, especially for grills, badges, and interior trim. Confirm scale and mounting points before purchase.
Select wheels with correct diameter and offset for 1/24 scale; test-fit prior to final assembly to avoid rubbing and to preserve the lowered silhouette.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved