ARC A11 Split Upper Deck Upgrade for Front Flex Control - O-ARCP05 by Factory Pro  [FP-O-ARCP05]

Price:
NZD$21.14
Brand:
Factory Pro
Model:
FP-O-ARCP05
Condition:
Brand New
Write a review

ARC A11 split front deck overview

This front split upper deck is specifically made for the ARC A11 and carries the Factory Pro part number O-ARCP05. Constructed from 2mm graphite, the split plate is intended to alter stiffness directly in front of the bulkhead area.

Because the deck is split, racers can tune left and right stiffness independently or experiment with alternate deck thicknesses to dial in turn-in and front traction. It suits 1/10 electric touring applications and venue-level tuning where subtle chassis flex adjustments change handling balance.

Installation follows the ARC A11 factory mounting pattern; remove the stock upper deck and refit using the same screw points. After installation verify clearance around the servo and suspension towers and run brief tests to check steering geometry and bump steer effects.

Can I use this on other ARC models?

This part is engineered for the ARC A11 mounting layout. Other ARC platforms may not share the same screw pattern, so confirm fitment before attempting installation.

How should I approach tuning left/right stiffness?

Try swapping different deck thicknesses or adding shims on one side to see how asymmetric stiffness affects turn-in and mid-corner balance. Make incremental changes and note lap-time or handling differences.

Is the part suitable for road and carpet tracks?

Yes. The 2mm graphite split deck is aimed at track tuning across typical 1/10 touring surfaces; adjustments will vary depending on traction levels and surface grip.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved