ARC A11 Upper Deck Upgrade, Graphite 2mm (O-ARCP04) by Factory Pro  [FP-O-ARCP04]

Price:
NZD$27.84
Brand:
Factory Pro
Model:
FP-O-ARCP04
Condition:
Brand New
Write a review

2mm Graphite Upper Deck for ARC A11

This replacement 2mm graphite upper deck is produced for the ARC A11 platform as an RC spare component. Swapping the stock plate alters chassis stiffness characteristics to change tuning response without modifying suspension geometry.

Fitting tips: the deck installs to the ARC A11's original upper deck mounting points and uses the same fasteners. Inspect current screw lengths and surrounding clearances before installation to guarantee correct engagement. No extra hardware should be necessary.

Tuning considerations: stiffening the upper deck shifts mid-span flex and often tightens turn-in while stabilizing mid-corner attitude. These effects can trade off against mechanical grip, so log changes and adjust one parameter at a time to see how lap pace and tyre degradation respond.

Specifications

  • Item: Upper deck
  • Material: Graphite, 2mm
  • Model Number: O-ARCP04
  • Compatibility: ARC A11

This graphite upper deck is a direct-fit option for ARC A11 hobbyists seeking a controlled stiffness adjustment to tune handling for different circuits and conditions.

Can this deck handle aggressive cornering and hard landings?

The 2mm graphite offers improved rigidity versus stock material and tolerates typical competition stresses, but inspect the part regularly for edge chips or mounting wear after heavy use.

Does the upgrade change suspension geometry?

No. The upper deck changes chassis flex characteristics without altering suspension pickup points or geometry; it modifies how the chassis bends under load rather than component locations.

Which track or tyre conditions benefit most?

Firmer decks often suit high-speed circuits requiring quick turn-in and stable mid-corner balance. They are also useful when using tyres that retain grip but need chassis support to prevent excessive roll.

Is the installation reversible if I want to revert?

Yes. The deck is a bolt-on replacement using stock fastener points, so you can reinstall the original plate at any time provided you kept the factory hardware and noted screw lengths.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved