ARRMA Kraton Outcast 1/5 30T M1.5 Spur MAKX030TS upgrade by GPM  [MAKX030TS]

Price:
NZD$29.85
Brand:
GPM
Model:
MAKX030TS
GTIN:
4894538416794
Condition:
Brand New
Write a review

Overview: MAKX030TS 30-tooth spur for ARRMA

The MAKX030TS is supplied as a direct aftermarket spur gear intended for ARRMA 1/5 Kraton and Outcast model ranges. This 30-tooth unit uses an M1.5 module and is forged from 20CrMnTi steel to increase resistance to wear and bending over softer stock materials.

Targeted at high-output 8S BLX brushless drivetrains, the gear improves durability under heavy loads and long runs. Fitment requires matching the M1.5 module, adjusting pinion/spur mesh and shims as necessary; it replaces the factory reference numbers listed below.

Packing includes

  • Spur Gear 30T Mod 1.5 - 1pcs

Original Name / Part No:

ARA310920?ARA311051

Compatible Models

  • ARRMA 1/5 Kraton 4X4 8S BLX Brushless Speed Monster Truck RTR-ARA110002 (Original Spur Gear 47T/M1.0)
  • ARRMA 1/5 Outcast 4WD 8S BLX Stunt Truck RTR-ARA5810 (Original Spur Gear 47T/M1.0)
  • ARRMA 1/5 Kraton 8S EXB 4X4 Roller Brushless Speed Truck-ARA5208 (Original Spur Gear 39T/M1.0 & 47T/M1.0)
  • ARRMA 1/5 Kraton 4X4 8S BLX EXB Brushless Monster Truck RTR-ARA5808V2 (Original Spur Gear 47T/M1.0)
  • ARRMA 1/5 Outcast 8S EXB 4X4 Roller Brushless Stunt Truck-ARA5210 (Original Spur Gear 39T/M1.0 & 47T/M1.0)
  • ARRMA 1/5 Outcast 4X4 8S BLX EXB Brushless Stunt Truck RTR-ARA5810V2 (Original Spur Gear 47T/M1.0)

Use this 20CrMnTi 30T M1.5 spur where increased strength is required; always confirm module and mesh during fitment and inspect the drivetrain after the initial run-in.

How long will this steel spur last compared with stock?

Expect noticeably better wear life under heavy loads thanks to the 20CrMnTi steel; actual longevity depends on driving style, power levels, and maintenance interval.

Does the M1.5 module differ from ARRMA originals?

Yes, this gear uses an M1.5 module. Many factory ARRMA spurs listed are M1.0, so verify your vehicle's pinion and transmission geometry before fitting.

Will this fit the models in the compatibility list?

It is offered to replace the factory references shown; check model compatibility and part numbers in the original name block to confirm fit.

Any heat or torque considerations to note?

Steel gears handle heat and torque better than softer alloys, but ensure bearings, diff, and motor cooling are adequate for sustained high-power runs.

Does the kit include any mounting hardware?

Only the single spur gear is included in the packing list; use your vehicle's existing screws and shims unless extra parts are specified separately.

What maintenance keeps this gear in top condition?

Regular inspection, correct mesh adjustment, bearing checks, and removing debris after runs will maximize gear life and performance.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved