ARRMA Talion 6S EXB CVD Shafts 116mm Front / 180mm Rear MTV6037S by GPM  [MTV6037S]

Engineered as scale replacement drives, these CVD shafts fit ARRMA Talion 6S EXB vehicles and are forged from hardened 4140 steel to boost resistance to wear and improve torsional stiffness. The components retain original mounting geometry for a like-for-like swap.

The set specifies a 116mm center front CVD and a 180mm center rear CVD, with 3.0mm pin thickness. A black hardened finish is applied to reduce surface wear and provide reliable mating surfaces for the CVD joints.

Designed as unit-for-unit replacements, the parts correspond to manufacturer references AR310472+ARA-3398 and are sized to conserve the Talion 6S EXB suspension and drivetrain alignment.

Fitment guidance: swapping to hardened 4140 shafts lowers drivetrain flex under heavy loads and helps keep gearbox and diff outputs aligned, which can reduce wear on cups if installed and checked for correct clearances. Confirm hub and wheel hex play and ensure the assembly rotates freely throughout suspension movement.

Compatible Models

• ARRMA 1/7 Talion 6S EXB 4X4 RTR Brushless Speed Truck-ARA7707V6