ARRMA Talion 6S EXB Front & Rear Lower Inner Pins 4x67.5mm MTV6/PIN67 by GPM  [MTV6/PIN67]

ARRMA Talion 6S EXB 4140 Steel Front & Rear Lower Suspension Pins (Inner) 4x67.5mm - GPM MTV6/PIN67
Price:
NZD$10.11
Brand:
GPM
Model:
MTV6/PIN67
Condition:
Brand New
Write a review

Inner pins for front and rear lower arms

This GPM replacement kit provides four inner lower suspension pins sized 4x67.5mm specifically for ARRMA Talion 6S EXB and compatible ARRMA 6S platforms. The pins are finished in blackened, hardened 4140 steel and intended as direct-fit items to recover pivot seating in the lower suspension arms.

Installed as wear parts inside the suspension linkage, these pins maintain arm alignment and consistent articulation even under aggressive use. They replace factory part AR330381 while matching original dimensions so no chassis alteration should be necessary when fitting the correct model parts.

Where applicable items ship pre-assembled and stability at installation can be improved by using a medium-strength threadlocker on fasteners to prevent them backing off during running. This product is designed for RC model use only.

Compatible Models

  • ARRMA 1/7 Talion 6S EXB 4X4 RTR Brushless Speed Truck-ARA7707V6
  • ARRMA 1/8 Talion 6S 4X4 RTR Brushless Speed Truck-ARA106048
  • ARRMA 1/8 Talion 6S BLX 4WD Extreme Bash Speed Truggy RTR-ARA8707
  • ARRMA 1/7 Fireteam 6S 4X4 BLX Speed Assault Vehicle RTR-ARA7618
  • ARRMA 1/7 Big Rock 6S 4X4 BLX Monster Truck RTR-ARA7612
  • ARRMA 1/8 Notorious 6S BLX 4WD Brushless Classic Stunt Truck With Spektrum RTR-ARA106044
  • ARRMA 1/8 Notorious 6S V5 4X4 BLX Stunt Truck With Spektrum Firma RTR-ARA8611V5
  • ARRMA 1/8 Kraton 6S BLX 4WD Brushless Speed Monster Truck With Spektrum RTR-ARA106040
  • ARRMA 1/8 Kraton 6S 4X4 Roller Brushless Speed Truck-ARA106053
  • ARRMA 1/8 Kraton 6S V5 4X4 BLX Speed Monster Truck With Spektrum Firma RTR-ARA8608V5
  • ARRMA 1/8 Kraton 6S EXB AVC 4X4 RTR Brushless Speed Truck-ARA8708T1
  • ARRMA 1/8 Kraton 6S EXB 4X4 RTR Brushless Speed Truck-ARA8708V6
  • ARRMA 1/8 Outcast 6S BLX 4WD Extreme Bash Stunt Truck RTR-ARA8710
  • ARRMA 1/8 Outcast 6S BLX 4WD Brushless Stunt Truck RTR-ARA106060
  • ARRMA 1/8 Outcast 6S BLX 4WD Brushless Stunt Truck-ARA106042
  • ARRMA 1/8 Typhon 6S 4X4 RTR Brushless Buggy-ARA106046
  • ARRMA 1/7 Infraction 6S 4X4 RTR Brushless All-Road Street Bash-ARA109001
  • ARRMA 1/7 Limitless 8S Avc 4X4 RTR Brushless Street Speed-ARA7816
  • ARRMA 1/7 Limitless 8S AVC 4X4 RTR Brushless Street Speed Machine Combo-ARA7816SPMX
  • ARRMA 1/7 Limitless 6S V2 Speed Bash Roller-ARA7116V2
  • ARRMA 1/7 Limitless All-Road Speed Bash-ARA109011
  • ARRMA 1/7 Mojave 6S BLX 4WD Brushless Desert Truck RTR-ARA106058
  • ARRMA 1/7 Mojave 6S V2 4X4 BLX Desert Truck With Spektrum Firma RTR-ARA7604V2
  • ARRMA 1/7 Mojave 6S EXB 4X4 Roller Brushless Desert Truck-ARA7204
  • ARRMA 1/8 Typhon 6S V5 4X4 BLX Buggy With Spektrum Firma RTR-ARA8606V5
  • ARRMA 1/8 Notorious 6S V6 4X4 BLX Brushless Stunt Truck RTR-ARA8611V6
  • ARRMA 1/8 Kraton 6S 4X4 BLX Brushless Speed Monster Truck RTR-ARA8608V6
  • ARRMA 1/7 Felony 6S BLX Street Bash All-Road Muscle Car RTR-ARA7617V2
  • ARRMA 1/7 Infraction 6S BLX V2 All-Road Truck RTR-ARA7615V2

Will these pins remove play in worn pivots?

Yes. Replacing worn inner lower pins with these correctly sized 4x67.5mm items will restore tighter pivot seating and reduce unwanted play.

How are the pins treated for durability?

The pins use hardened 4140 steel with a blackened finish to improve strength and wear resistance under repeated suspension movement.

Do these require any special assembly steps?

They ship pre-assembled where applicable; apply a medium-strength threadlocker to fasteners and check fit before final runs to ensure secure installation.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved