Arrowmax AM-020062 3x6x0.2mm Stainless Shims 10 Pack  [AM-020062]

Arrowmax AM-020062 Stainless Steel Shims 3 x 6 x 0.2 (10)
Price:
NZD$9.03
Brand:
Arrowmax
Model:
AM-020062
Condition:
Brand New
Write a review

Fine Tune Fitment with Arrowmax AM-020062 Shims

Hobbyists who value precise setups will find the Arrowmax AM-020062 shims useful for adjusting small gaps and alignment issues. Each shim is 3x6x0.2mm and the set of ten gives you plenty for routine tuning and repairs.

Where These Shims Help Most

They are ideal for correcting gear backlash, spacing bearings, and trimming suspension linkages. Because the thickness is consistent, you can make incremental changes to handling and drivetrain engagement without guessing.

Rugged, Low-Maintenance Design

The stainless steel build resists bending and everyday corrosion, making these shims a practical choice for both indoor track cars and rougher outdoor use. They fit a broad range of models and require no special tools to apply.

Can these shims be used on bearings and axles?

Yes, they are thin and precise enough to shim bearings and axle spacings where small adjustments affect play and alignment.

How many shims do I typically need for a gearbox rebuild?

It depends on the design, but having a selection of 0.2mm shims allows you to experiment with 1 to 4 layers to dial in mesh. The 10-piece pack covers several rebuilds.

Do I need any adhesive to hold shims in place?

Usually no. Properly seated shims stay put between machined surfaces. If you need to prevent movement during assembly, a dab of light grease or thread locker on adjacent fasteners can help.

Are these shims compatible with 3D printed components?

They can be used with 3D printed parts, but ensure the mating surfaces are flat and firm. Soft printed material may compress, so test fit before final assembly.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved