Arrowmax am-210014 Silicone Shock Fluid 59ml 900cst for R/C Shocks  [am-210014]

High-viscosity 900cst shock oil for scale R/C

The Arrowmax am-210014 formula ships in a 59ml container as a 900cst silicone shock fluid intended for scale R/C shock absorbers and dampers. Sold as a maintenance and tuning item, it adjusts damping by changing oil viscosity rather than swapping mechanical parts.

Functionally the oil controls compression and rebound timing: a thicker 900cst fluid increases damping force and slows rebound motion, whereas thinner oils allow quicker response. Use this grade when you need firmer damping characteristics for your setup.

Service steps are conventional: disassemble the shock safely, drain the existing fluid, check seals and pistons for wear, then fill and bleed in line with your shock maker's procedure. Stick to the fill volumes and piston setups recommended for your shocks.

Store the bottle upright with the cap tight, keep it clean and dry, and do not mix different formulations unless the manufacturer confirms compatibility. Regularly check seals and cleanliness to avoid inconsistent damping.

A 59ml bottle gives enough oil for several rebuilds and lets you test 900cst damping across different track surfaces or conditions.