Arrowmax AM-348024 24T 48P 7075 Aluminium Pinion Gear  [AM-348024]

Arrowmax AM-348024 Pinion Gear 48P 24T 7075 Hard
Price:
NZD$8.94
Brand:
Arrowmax
Model:
AM-348024
Condition:
Brand New
Write a review

Performance and Build of the Arrowmax AM-348024

The Arrowmax AM-348024 pinion is manufactured from 7075 aluminium to deliver a robust component for serious RC setups. Its material choice focuses on resisting deformation while keeping mass low for improved response.

Compatibility with 48 Pitch Systems

As a 48 pitch, 24-tooth pinion, it is intended to mesh cleanly with compatible spur gears. The geometry and 7075 aluminium construction make it a dependable choice for on-track and club-level use across many models.

Practical Fit and Care Tips

Ensure the pinion meshes with the spur without too much play or binding. Regular cleaning of teeth and occasional checks of mounting grub screws will prevent most common issues and maintain smooth operation.

Is the AM-348024 suitable for drift setups?

Yes, provided your drift car uses 48 pitch gearing and the required tooth count. Check motor pinion shaft diameter and mounting style to ensure fitment.

Can I use this pinion on electric off-road cars?

If the off-road kit uses 48 pitch gearing it can be used, but verify that ground impact and debris exposure suit aluminium pinions or consider protective measures for rough conditions.

How do I check for wear on the pinion?

Inspect tooth profiles for rounding, pitting or uneven contact patches. Replace the pinion if tooth edges are visibly damaged to avoid damaging the spur gear.

Are any special tools needed to fit it?

A small hex driver for the grub screw and a feeler or shim for checking mesh are usually sufficient. A handheld file or fine sandpaper can tidy minor burrs if present.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved