Arrowmax AM-464064 64P 64T Pinion Gear Setup Edition  [AM-464064]

Arrowmax AM-464064 Pinion Gear 64P 64T(SL)
Price:
NZD$9.95
Brand:
Arrowmax
Model:
AM-464064
Condition:
Brand New
Write a review

Dial in gear ratio with Arrowmax AM-464064

The Arrowmax AM-464064 pinion is a 64-pitch, 64-tooth component developed for tuners who swap ratios regularly. It is designed to give consistent engagement so you can test small changes to top speed and acceleration.

Compatibility and typical uses

This pinion fits many 1/10 and similar scale models where 64-pitch gearing is specified. It is a good choice when you need predictable behaviour across different spur sizes and track surfaces.

Installation pointers and upkeep

Set the mesh so the contact patch is even across tooth faces to avoid chipping. Inspect the pinion after high rpm runs and clear any debris from the gear train to maintain smooth operation.

Can I use this pinion on touring cars and buggies?

Yes, where the vehicle uses 64-pitch gears the Arrowmax AM-464064 works for both touring cars and 1/10 buggies. Verify shaft fit and motor spacing first.

Is this suitable for high Kv brushless setups?

The pinion can handle high rpm motors if mesh and pinion seating are correct. Use a motor mount that prevents slippage under load.

Should I change pinion after heavy use?

Inspect teeth for rounding or burrs after extended racing. Replace the pinion if wear changes the mesh pattern or causes noise.

What tools help with a clean install?

A small hex driver, feeler gauge or shim, and a marker to check contact pattern are useful for setting up the pinion accurately.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved