Arrowmax AM-920013 Medius Xray T4 FWD 2.0mm Front Topdeck Precision Brace  [AM-920013]

Arrowmax AM-920013 AM Medius Xray T4 FWD Topdeck 2.0mm Front
Price:
NZD$21.73
Brand:
Arrowmax
Model:
AM-920013
Condition:
Brand New
Write a review

Improve Front-End Control with Arrowmax AM-920013

The Arrowmax AM-920013 2.0mm Front Topdeck adds useful stiffness to the Xray T4 line, helping to stabilise the chassis and refine steering accuracy. It is produced to suit the T4 2019 Specs and concentrates support toward the front for better weight balance during cornering.

Construction and Compatibility

Manufactured to align with the Xray T4 chassis, this topdeck fits without modification on compatible models. Its 2.0mm thickness aims to offer longevity while retaining a degree of flex that keeps handling predictable on variable surfaces.

Installation Notes

When fitting the Arrowmax topdeck, work the screws in a cross pattern and avoid over-tightening a single fastener. Even pressure helps the deck sit flat and prevents localized stress that can change handling.

Can I use this on non-2019 T4s?

It is optimised for the T4 2019 Specs. Some older T4 chassis share similar hole patterns and may accept the plate, but verify fitment before committing.

Does the 2.0mm thickness affect tyre wear?

A stiffer front can change load distribution and may alter tyre feel; monitor wear and adjust camber and toe to dial in grip after fitting.

Should I change suspension settings?

Small suspension tweaks are typical after fitting a stiffer topdeck. Try softer front springs or reduced arb rate if the car feels too nervous initially.

How do I avoid creaks or binding?

Use nylon washers where appropriate and ensure fasteners are clean. Lubricate pivot points and confirm nothing pinches the chassis stack during full lock turns.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved