Auper D6 Chassis Plate SAK-D6801/PU - Anodized Purple by 3Racing  [SAK-D6801/PU]

Price:
NZD$81.77
Brand:
3Racing
Model:
SAK-D6801/PU
Condition:
Brand New
Write a review

Stiffness upgrade for Auper D6

The 3Racing SAK-D6801/PU is an aluminum chassis plate designed for the Auper D6 platform, finished in anodized purple. It replaces the stock plate to change chassis rigidity and handling response on RC on-road kits.

This component is aimed at hobbyists refining chassis setup: switching to an aluminum plate alters flex characteristics, weight distribution, and the way suspension inputs convert to handling. It is specified for Auper D6 scale kits only.

Fitting is simple for those experienced with kit builds. Remove the original chassis per your manual, confirm hole alignment, move any spacers or mounts as required, and secure with the existing screws. No additional parts are listed as included.

Note that increased chassis stiffness typically reduces flex and can improve turn-in and mid-corner sensitivity, while possibly lowering traction on loose surfaces. Use the plate alongside incremental adjustments to springs and shocks to reach your target handling.

Specifications

  • Item Auper D6 aluminum chassis plate
  • Material Aluminum
  • Model Number SAK-D6801/PU
  • Compatibility Auper D6

Fit the 3Racing SAK-D6801/PU when you want a reliable aluminium replacement for controlled setup testing on an Auper D6 1/10 electric on-road car, and adjust suspension settings step by step.

Does this plate match the stock hole pattern?

Yes, it is produced to align with the Auper D6 mounting points; always dry-fit first to confirm exact alignment before final tightening.

Will I need new spacers when swapping plates?

Some builds reuse the original spacers; check stack heights during trial assembly and reuse or replace spacers to maintain correct clearances as needed.

Are special tools required to remove the original plate?

Basic RC assembly tools such as hex drivers and a torque-aware screwdriver are suitable; follow your kit manual to avoid stripping threads or misaligning components.

Should I change my shock settings after installation?

Yes, adjust damping and spring rates incrementally since a stiffer chassis changes how the suspension needs to be tuned for balanced handling.

What finish is used on the plate?

The plate is anodized purple to provide surface hardness and corrosion resistance, though normal wear from maintenance and contact is to be expected over time.

Can I revert to the original plate easily?

Yes, the change is reversible: keep the original hardware and follow the reverse of the installation steps to restore the factory configuration.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved