Auper D6 Spur Adaptor SAK-D6809D/BU Blue - Replacement Part by 3Racing  [SAK-D6809D/BU]

Spur adaptor tailored for Auper D6

This RC-scale adaptor is designed as either a direct replacement or an upgrade part for the Auper D6 chassis. It positions the large spur gear on the drivetrain hub so the gear mesh and rotation remain correct within the gearbox line.

The item is identified by 3Racing SAK-D6809D/BU and arrives with a blue finish. The adaptor's job is precise mechanical alignment and secure seating of the spur; after fitting, check alignment and backlash to make sure the spur engages the pinion cleanly.

Installation notes: replace the existing spur mounting piece on the Auper D6 with this adaptor, confirm motor pinion concentricity, and ensure the spur turns freely through suspension travel. Inspect neighbouring bearings and gearbox mating surfaces during reassembly to keep the drivetrain dependable.

Tuning advice: tiny shifts in spur placement change mesh and noise characteristics, so adjust gradually while checking engagement with thin paper or close visual inspection. Keep usage limited to RC model drivetrain systems.