Yokomo SD-L7C Multi-Color LED Unit for Receiver Power  [SD-L7C]

7-color LED — receiver powered

The SD-L7C LED board provides seven-color automatic cycling when connected to a DC 4.8V-7.2V source such as a radio receiver BEC. Made for low-voltage model electronics, it offers multi-color show lighting without additional controllers.

A spare connector is included so two SD-L7C modules can be chained for extended coverage or paired effects. To install, wire the module to your receiver power output or a suitable external BEC, observing polarity, and secure the PCB with tape or screws where appropriate. This unit is intended for use in R/C models only and must not be tied to full-size vehicle electrical systems.

Use the SD-L7C for decorative illumination or to help with low-light orientation. No programming is required, but the final housing and mounting position will influence color appearance and brightness, so test placement before final installation.