Awesomatix A800MMX Graphite Top Deck 2.0mm by Factory Pro O-ACP003  [FP-O-ACP003]

Solid one-piece graphite top plate for A800MMX

The Factory Pro O-ACP003 is an aftermarket upper deck made specifically for the Awesomatix A800MMX, formed as a single 2.0mm graphite plate. It mounts to the factory upper-deck points and is intended to change chassis stiffness and flex behaviour while leaving suspension geometry untouched.

In tuning terms this thicker graphite deck ups torsional rigidity relative to thinner plates, giving a sharper initial turn and less mid-corner sag. Use it when racing on higher-traction surfaces or when you want a firmer top-end response combined with a softer lower deck. Expect steady, chassis-level adjustments rather than wholesale handling cures.

Fitment is familiar to seasoned modellers: swap out the stock upper deck, reuse the A800MMX mounting locations and hardware, then check alignments. Confirm there is adequate clearance for radio gear, the ESC and the servo before final tightening.

Ideal for drivers who want a dependable graphite top deck to stiffen an A800MMX chassis and tune handling for medium to high-traction circuits; always verify fit and electronics clearance during installation.