Axial AX10 Deadbolt Orange-Anodized Shock Bodies - AX10-24000-OR by Jazrider  [AX10-24000-OR]

AX10 Deadbolt orange-anodized shock upgrade

This anodized aluminum shock set fits the Axial AX10 Deadbolt and provides a colour-matched orange finish. The machined housings replace the standard plastic bodies while keeping original internal parts and mounting geometry.

These components are intended as direct-replacement shock bodies so you can reuse springs, pistons, and shock oil or service them during fitting. The aluminium casing offers a more rigid shell for repeatable setup changes.

Fitting is typical for AX10 maintenance: open the existing shocks, transfer or refresh internals as needed, then install the aluminum housings in the stock positions using common hand tools. Check seals and shafts to avoid post-fit leakage.

The aluminium bodies help maintain consistent stroke under load when testing different spring rates and oil grades; tuning still centres on spring selection, piston choice, and oil viscosity. AX10-24000-OR.