Axial AX10 Scorpion Chassis Upgrade for Trail Use AX10-01/GR by 3Racing  [AX10-01/GR]

AXIAL AX10 Scorpion Chassis Set - 3RACING AX10-01/GR
Price:
NZD$31.84
Brand:
3Racing
Model:
AX10-01/GR
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

AX10 Scorpion chassis summary

The AXIAL AX10 Scorpion chassis set (AX10-01/GR) provided by 3Racing is an aftermarket replacement intended to restore the base structure of Axial AX10 Scorpion models. It acts as a direct-fit platform when you want to repair damage or start a tuned rebuild while retaining drive components.

Designed to accept the stock electronics and running gear, this chassis lets you transfer servo, ESC, motor, gearbox assembly and wheel hubs from the original unit. Retain factory fasteners where possible or replace with suitable hardware during reassembly.

Fitting advice: use the replacement chassis to reset mount heights and alignment for body and suspension items. This part preserves the original driveline layout, so confirm clearances during a mock build prior to final tightening.

Specifications

  • Item: AXIAL AX10 Scorpion Chassis Set
  • Model Number: AX10-01/GR
  • Material: Not specified
  • Compatibility: AX10 Scorpion

Ideal for bringing an AX10 Scorpion back to running order or creating a consistent platform for step-by-step hop-ups that leave the drivetrain intact.

Is the chassis compatible with aftermarket axle sets?

The chassis is a neutral platform; compatibility depends on the axle mount points and axle assembly dimensions. Check your axle spec against the chassis mounting layout before swapping.

Will motor or gearbox alignment change?

No inherent changes to drivetrain ratios are included. You should align motor and gearbox during mock assembly to ensure proper mesh and clearance.

What electronics fit without modification?

Standard AX10 servos, ESCs and motors that fit the original chassis will generally fit this replacement; confirm mounting hole spacing and overall dimensions before final fitment.

Any tips for achieving correct ride height?

Set suspension pickup points and spring preload with wheels fitted, then test on a level surface to adjust ride height and avoid binding in full articulation.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved