Axial Racing RR10 Bomber Front/Rear 105mm Adjustable Aluminium Dampers RR13105F/RP by GPM  [RR13105F/RP]

Axial Racing RR10 Bomber Aluminium Front/Rear Adjustable Spring Damper (105mm) Withm Aluminium Ball Ends - 1pr set - GPM RR13105F/RP
Price:
NZD$43.40
Brand:
GPM
Model:
RR13105F/RP
GTIN:
4894538166460
Condition:
Brand New
Write a review

Machined 105mm aluminium dampers for trail rigs

These front and rear adjustable spring dampers are a GPM aftermarket replacement for the Axial Racing RR10 Bomber platform. With a 105mm length and aluminium construction, the matched pair targets scale trail and technical crawler setups that need precise suspension adjustment.

The aluminium damper bodies and ball ends create consistent pivot points and a solid platform for changing spring preload and damping geometry. Use them to tweak ride height, refine weight transfer, or swap out worn plastic shocks while keeping the RR10 Bomber suspension layout intact.

Fitting advice: the product is sold as a 1 pr set for front and rear. Standard hand tools like a hex driver and pliers will normally handle the swap; measure your current shock eyelet spacing and lower mount type before installation to ensure compatibility.

Specifications

  • Item: Axial Racing RR10 Bomber Aluminium Front/Rear Adjustable Spring Damper (105mm) With Aluminium Ball Ends - 1pr set
  • Material: Aluminium
  • Model Number: RR13105F/RP
  • Compatibility: Axial Racing RR10 Bomber

Opt for these aluminium 105mm shocks when you need a reliable, serviceable upgrade that makes tuning quicker without changing the chassis geometry.

They are specified for the Axial Racing RR10 Bomber; other models with similar 105mm eyelet spacing may fit but confirm lower mount type and spacing first.
If the dampers are supplied without oil, you will need shock oil and appropriate springs; if prebuilt, inspect and refresh oil to tuning specification for best performance.
The listing is for a 1 pr set of front and rear adjustable aluminium dampers; check the seller notes for springs, hardware, or oil inclusion.
Yes, both the damper bodies and the ball ends are aluminium, giving stable mounting and reduced flex compared with plastic components.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved