Axial Racing SCX10 90mm Aluminium Internal Shocks SCX090X by GPM  [SCX090X]

Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X
Price:
NZD$32.39
Brand:
GPM
Model:
SCX090X
GTIN:
4894538011265
Condition:
Brand New
Write a review
alt="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X" title="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X"
alt="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X" title="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X"
alt="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X" title="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X"
alt="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X" title="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X"

Aluminium 90mm Internal Shocks Built for Trail Rigs

This pair of internal shocks is designed to suit Axial Racing SCX10 platforms and is machined from aluminium with engraved markings to help you keep parts organised during maintenance. The set comes as a matched pair sized at 90mm for common SCX10 setups.

Installation involves taking off the stock shocks and opening the shock bodies to fit onto the SCX10 shock towers and axle mounts. No specialist equipment is required beyond a basic hex set and standard shock assembly tools when filling oil and seating pistons and springs.

In service, these aluminium internals influence damping and ride height, allowing finer tuning of suspension behaviour for scale crawling and technical trail use. The engraved IDs make part rotation and identification straightforward while the aluminium shells give better rigidity than plastic alternatives.

Specifications

  • Item: Axial Racing SCX10 front/rear internal shocks (90mm).
  • Material: Aluminium.
  • Model Number: SCX090X.
  • Compatibility: Axial Racing SCX10.

Ideal for replacing worn SCX10 internals or upgrading to aluminium bodies for repeatable fit and easier identification during setup and servicing.

Do these suit modified SCX10 rigs?

They fit standard 90mm mounting patterns; if you run extended links or altered shock mounts, double check mounting hole spacing before fitting.

Can I use these with heavier springs?

Yes, the aluminium bodies handle higher spring loads better than plastic, but be sure your shocks and mounts are set up to accept the increased preload and damping needs.

Is any disassembly required for installation?

Basic disassembly of the shock body is needed to install pistons and oil; follow normal shock assembly procedures and use the correct tools for sealing and filling.

How do I identify left and right shocks?

Use the engraved identifiers to mark left/right or front/rear during initial setup so you can rotate or replace parts without mix-ups.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved