AXIAL Racing SCX10 II 27mm Aluminium Wheel Hex Adapter Set SCX2010/27MM by GPM  [SCX2010/27MM]

AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM
Price:
NZD$11.56
Brand:
GPM
Model:
SCX2010/27MM
GTIN:
4894538228861
Condition:
Brand New
Write a review
alt="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM" title="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM"
alt="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM" title="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM"
alt="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM" title="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM"
alt="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM" title="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM"
alt="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM" title="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM"
alt="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM" title="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 4mm Hole Wheel) - 1pr set - GPM SCX2010/27MM"

27mm aluminium adapters for SCX10 II axles

This aluminium wheel hex pair is an aftermarket accessory to increase wheel offset on AXIAL Racing SCX10 II rigs. The adapters add a 27mm total spread to move wheels outward, improving lateral grip and stability on technical lines.

Each adapter pairs a machined aluminium hex body with a Delrin collar to locate the wheel. An O-ring fits one side while a spring steel ring and washers sit on the other side to keep preload on the assembly. A stainless steel cap head screw secures the unit to 4mm threaded wheel shafts, and the central 4mm bore accepts wheels with a 4mm mounting hole.

To install, place the adapter onto a compatible 4mm threaded shaft, seat the Delrin collar, stack the O-ring and spring ring as indicated by the part orientation, then tighten the stainless screw to lock the wheel. After fitting, inspect steering and suspension clearance through full travel and verify wheel balance and bearing alignment as part of setup checks.

This item is compatible with

  • AXIAL SCX10 II
  • AXIAL SCX10 II 90047

Which wheels and shafts are compatible?

The adapters are compatible with 4mm threaded wheel shafts and wheels that have a 4mm central mounting hole, matching the adapter bore and fastening hardware.

Do I need to trim bodywork after fitting?

Possibly; widening the track can bring tyres closer to arches or chassis mounts. Check clearance with steering lock and suspension droop, and trim or adjust as required.

What hardware is included to keep the wheel from slipping?

The design relies on a stainless cap head screw paired with a Delrin locating collar, plus an O-ring, spring steel ring and washers to hold preload and prevent slippage.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved