AXIAL Racing SCX10 II Centre Shaft Upgrade Aluminium Front and Rear SCX2037A by GPM  [SCX2037A]

AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A
Price:
NZD$58.10
Brand:
GPM
Model:
SCX2037A
GTIN:
4894538261097
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A" title="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A"
alt="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A" title="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A"
alt="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A" title="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A"
alt="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A" title="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A"
alt="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A" title="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A"
alt="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A" title="AXIAL Racing SCX10 II Aluminium Front+Rear Center Shaft With Steel Joint (S:100mm-107mm, L:135mm-142mm) - 1set - GPM SCX2037A"

Lightweight aluminium centre shafts for SCX10 II

This front and rear centre shaft set is intended for AXIAL Racing SCX10 II vehicles and carries the model number SCX2037A. The design combines aluminium shaft sections with a steel coupling to reduce spinning mass while keeping the joint area resistant to wear.

The kit is supplied as a full set covering short (S:100mm-107mm) and long (L:135mm-142mm) ranges, suitable as direct replacements for original centre shafts. Aluminium sections help reduce rotating inertia compared with heavier all-steel alternatives, while the steel joint secures long term contact durability.

Fitting is simple for hobbyists used to SCX10 II driveline work, using the included screws and O-rings to lock the assembly and seal the joint. In tuning, these parts can smooth drivetrain rotation and may ease motor load at slow crawl speeds depending on your gearing choices.

Packing includes

  • 2.5XM4X11 Screw Shaft - 4pcs
  • 4X2.5 O-Ring - 2pcs

Specifications

  • Item: Front + Rear Center Shaft with Steel Joint, 1set
  • Material: Aluminium (shafts) and Steel (joint)
  • Model Number: SCX2037A
  • Compatibility: AXIAL Racing SCX10 II
  • Size Range: S:100mm-107mm, L:135mm-142mm

Ideal when swapping out worn or heavy shafts for a lighter rotating assembly; double-check measured lengths before installation.

Which length should I choose for my SCX10 II?

Measure the distance between your shaft mounts on the chassis and choose S or L to match the working length range listed in the specifications.

Are replacement O-rings available?

Standard 4X2.5 O-rings are used; you can source replacements from general RC parts suppliers if needed.

Will this affect low speed control?

Reduced rotating mass can make the drivetrain feel slightly smoother at low speeds, but handling is more influenced by gearing, motor torque, and suspension setup.

Do I need special tools to install?

Basic hex drivers and a steady hand are enough; ensure screws are tightened to a sensible torque and O-rings sit correctly to avoid leaks.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved