Axial Racing Wraith Servo Mount Upgrade AW-23015-BK by Jazrider  [AW-23015-BK]

Carbon servo plate with aluminium bracket

This aftermarket assembly pairs an aluminum mounting bracket with a carbon servo plate made for the Axial Racing Wraith. It is intended as a performance upgrade to improve servo support rather than modify steering geometry.

The aluminum section delivers a rigid anchor while the carbon plate gives a low-mass, flat interface to the servo. Combined, they reduce mount deformation and maintain more consistent steering feel when crawling or running trails.

Fitment follows the Wraith's standard servo bay and existing anchor points and is suitable for hobbyists familiar with basic chassis work. Ensure the servo output and horn clear the plate and that linkages run without binding before finalising the installation.

Service advice: set the servo to center before tightening, check there is clearance around nearby chassis parts, and run a low-speed steering test to confirm no rubbing. Regularly inspect fasteners for tightness after initial runs.