Axial Racing Yeti XL Front Knuckle Steel King Pin Set for Upgrades - GPM YTL004S [YTL004S]

Axial Racing Yeti XL Steel King Pin For Front Knuckle(AX31046) - 4pcs - GPM YTL004S

Price:

NZD$4.28

Brand:

GPM

Model:

YTL004S

GTIN:

4894538243161

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Axial Racing - YETI XL

Front knuckle king pins in steel

This is a replacement king pin set intended for the Axial Racing Yeti XL front knuckle, listed as model YTL004S from GPM. The pack includes four steel pins that locate the knuckle inside the hub carrier and are built to withstand the shear forces commonly experienced in off-road RC running.

Installation is straightforward for those used to front-end servicing: remove the wheel and knuckle, push out the worn pins, and install the new steel pins so they seat correctly with the existing bearings and hardware. Check for clearance and free rotation before final reassembly and avoid overtightening the surrounding screws.

Fit these as direct replacements for worn or damaged pins and inspect the hub and knuckle mating surfaces during service intervals to maintain predictable steering feel and suspension behaviour.

Are these suitable for the Yeti XL knuckle AX31046?

They are specified for Axial Racing Yeti XL front knuckle assemblies; verify against knuckle part number AX31046 to ensure exact fit prior to fitting.

Any tips for pressing the pins in?

Use a soft-faced driver or a press to seat the pins evenly, avoid hammering directly on the knuckle, and confirm the knuckle rotates freely before tightening fasteners.