Axial Racing Yeti XL Upgrade Spur Adapter and 32 Pitch 65T Steel Spur - YTL1665T by GPM  [YTL1665T]

65T 32 pitch steel spur with aluminium adapter for Yeti XL

This replacement and hop-up assembly pairs an aluminium spur gear adapter with a 32 pitch, 65T steel spur gear and is supplied as a 2 piece set. The components align with the part references in the product listing and suit the Axial Racing Yeti XL platform.

The adapter provides the mechanical interface that mounts the spur to the axle or bearing carrier, while the 65T steel spur supplies the required tooth count and pitch for this drivetrain layout. Before fitting, confirm the gearbox has clearance for this diameter and pitch of spur gear and check alignment with the mating surfaces.

During installation rotate the drivetrain manually to check pinion-to-spur engagement, ensure the adapter seats flat, and clean bearings and gearbox faces to keep mesh consistent and prevent premature tooth wear.

Use this set as a direct replacement or for fine tuning the Yeti XL drivetrain; always perform gear-mesh checks before running.