Axial RR10 Compatible 2.2 Rally Tyres and Wheels AW2206F/RA45 by GPM  [AW2206F/RA45]

2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45
Price:
NZD$73.56
Brand:
GPM
Model:
AW2206F/RA45
GTIN:
4894538290295
Condition:
Brand New
Write a review
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"

2.2 inch Rally Tyres Summary

This 2.2 inch rubber rally tyre and plastic wheel set, model AW2206F/RA45, is an aftermarket choice for scale RC rally and off-road machines that take a 5mm shaft and 12mm hex hub.

The layout is focused on usable grip rather than showy styling: a pronounced groove tread pattern increases mechanical bite on loose surfaces, while the plastic wheel keeps mounting simple and the appearance clean. The rubber compound offers steady compliance for tuning traction without having to rework suspension geometry.

Installation is quick for anyone used to 12mm hex wheels and 5mm axle pins; the wheels mount to standard hex hubs for an easy swap. These tyres are handy for dialing mid-speed grip and enhancing steering feedback on rally stages where tread bite is more important than soft compound tack.

Compatible Models

  • Axial RR10
  • Wraith
  • SMT 10 Grave Digger Monster Jam
  • G-made Rock Buggy R1
  • Other models with 5mm shaft hole and 12mm hex

For scale rally or light rock tasks that benefit from firmer rubber and pronounced tread, this 2.2 inch set is a straightforward, no-fuss option for compatible 5mm/12mm hubs without driveline modification.

Are these tyres suitable for SMT 10 models?

They are listed as compatible with SMT 10 and other models that share a 5mm shaft and 12mm hex configuration; confirm your hub dimensions before fitting.

Will tyres arrive glued to the rim?

The product is described as rubber tyres on plastic wheels; the source does not state glued mounting or foam inserts, so expect standard loose mounting unless the seller specifies otherwise.

What surface are they best on?

The deep-groove tread is aimed at loose and mixed rally surfaces where mechanical bite delivers consistent cornering and exit grip over slick compounds.

Do these change handling significantly?

They move the traction balance toward firmer, tread-driven grip; you may find small setup tweaks to damping or toe help restore your preferred steering balance.

Is this a full set or a pair?

The listing indicates a 2pc set intended as a pair or for replacements, not a full four-wheel kit.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved