Axial SCX10 48P 87T Steel Spur SSCX087T by GPM  [SSCX087T]

Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T
Price:
NZD$20.40
Brand:
GPM
Model:
SSCX087T
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 87T - 1pc set (For SCX10, Wraith) - GPM SSCX087T"

Specification for 48P 87 Tooth Steel Spur

The SSCX087T is an 87T, 48 pitch single-piece spur gear made for Axial SCX10 and Wraith chassis, crafted from steel #45. It is intended as a scale driveline replacement for hobby crawlers, offering a direct-fit option where the original uses the same pitch and tooth count.

This part restores damaged large spur teeth and is also used when changing gear ratios during setup. Confirm your pinion is 48 pitch and that the gearbox spacing accepts 87T before installation to avoid mesh problems. Fitting usually requires simple gearbox access and alignment checks only.

Offered as a 1pc unit, the gear is suitable for routine maintenance and hands-on tuning on compatible platforms, for RC use only.

Compatible Models

  • SCX10
  • Wraith

Will this mesh with my existing pinion?

It will mesh correctly only if your pinion is 48 pitch and the tooth count matches the gearbox spacing; double check both before fitting.

Does steel #45 need special care?

Steel #45 is durable for crawling, but inspect mating gears regularly and keep lubrication appropriate to reduce wear on softer pinions.

Are modifications required to fit?

No chassis modifications are normally needed; most fits require gearbox cover removal and standard alignment checks.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved