Axial SCX10 Adjustable Aluminium Link Kit 308mm Wheelbase SCX049/308 by GPM  [SCX049/308]

Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308
Price:
NZD$40.96
Brand:
GPM
Model:
SCX049/308
GTIN:
4894538027150
Condition:
Brand New
Write a review
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308" title="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308"
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308" title="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308"
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308" title="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308"
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308" title="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308"
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308" title="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308"
alt="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308" title="Axial Racing SCX10 Aluminium Adjustable Link Parts For 308mm Wheelbase - 6pcs set - GPM SCX049/308"

Adjustable aluminium link set for SCX10 crawlers

This six-piece aluminium link kit is designed to fit Axial Racing SCX10 models that use a 308mm wheelbase. The parts replace stock plastic links to deliver steadier geometry for suspension setup and ride-height adjustment on scale crawlers.

Manufactured from machined aluminium, the links offer greater stiffness than original plastic parts while the threaded adjusters let you refine length without cutting or modifying the chassis. Install and test them using common RC workshop precautions.

Practical fitment tips:

  • Verify thread orientation and pitch on each end before tightening to prevent damaged threads.
  • Apply thread-lock where two metal components mate if recommended, and recheck steering range and link clearance after fitting.
  • Make incremental length changes and drive slowly to evaluate articulation and tyre contact before finalising settings.

Specifications

  • Item: Adjustable link set, 6 pcs
  • Material: Aluminium
  • Model Number: SCX049/308
  • Compatibility: Axial Racing SCX10 308mm wheelbase

Do these replace the stock plastic links directly?

Yes, they are made to replace the factory plastic links on SCX10 chassis with a 308mm wheelbase, but always confirm hole spacing before fitting.

Any special assembly notes?

Use the correct hex driver to avoid rounding fasteners, and check that the threaded adjusters move freely before final assembly.

Will they increase wear on mounts?

Aluminium is stiffer than plastic so inspect plastic mounting points for fit and clearance; consider reinforcements if mounts show slop or wear.

How should I test new link lengths?

Adjust a single link a small amount, then drive slowly over varied terrain to check axle roll and tyre contact patches before changing other links.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved