Axial SCX-10 Compatible Pendulum Wheel Weight GPM023X 20pcs set by GPM  [GPM023X]

Pendulum weights built for technical crawling

The GPM023X brass pendulum-style wheel knuckle axle weight adds focused mass low at each wheel to help tyres keep hold on steep faces and uneven tracks. A central bearing and Delrin collar let the weight hang correctly so the tyre tends to stay planted rather than spinning or digging in.

The set includes multiple adapters, pins, shims, washers and bearings to suit a range of crawler platforms. Fit these when you need extra downward force on the wheel to improve contact on low-angle features and to reduce recovery stalls in soft ground.

Included items in the kit (as supplied):

• 31mm Hex Adapter for TRX4 - 2 pcs
• 21mm Hex Adapter for other models - 2 pcs
• Stainless Steel Pin 2x10 - 2 pcs
• 5mm Spring Steel Shims - 2 pcs
• 5mm Metal Washer w.opening - 2 pcs
• 19mm Stainless Steel Hex Socket Screws - 2 pcs
• Metal Washer for GMADE models - 2 pcs
• M4x2.5x11 Pin - 2 pcs
• 12x18x4 Bearings - 2 pcs

Key technical and fit notes taken from the manufacturer:

• The single pendulum weight is specified as 128 gram, not including the bearings and collars.
• Two hex widener sizes are provided: 31mm hex wideners intended for Traxxas TRX-4, and 21mm hex wideners for Axial SCX-10 I/II, GMADE Sawback family and HPI Venture 1165642.
• Wheels must have an inner diameter of 45mm and a wheel shaft hole of 5mm to be compatible with this kit.
• Installation location is on the outer case of the front and rear knuckle arms where this aftermarket part mounts to add mass not present on the original chassis.
• For TRX-4 use, insert the white Delrin collars on the rear side of the pendulum where there is a groove and secure the hex adapter with the supplied screw pin.
• For Axial SCX-10 I/II, GMADE Sawback/Sawback 4LS/Komodo and HPI Venture 1165642, press bearings on both sides of the pendulum and install the hex adapter directly onto the supplied steel pin.

Fit these brass pendulum weights where extra low-mounted mass helps tyres conform to rock lines and deep ruts; always confirm wheel ID and shaft hole size and follow the platform-specific pin and collar orientation during installation.