Axial SCX10 Honcho Front Alloy C-Hub Replacement SCX019 by GPM  [SCX019]

Precision alloy C-hub for SCX10 Honcho

This aftermarket alloy front C-hub is produced for the Axial Racing SCX10 Honcho platform and carries the model number SCX019 from GPM. It is supplied as a direct replacement component that keeps the stock mounting geometry intact while upgrading the material of the hub.

Material and role: constructed from alloy with cast and machined surfaces, the unit gives a firmer mounting point for the steering knuckle than typical plastic parts, plus a durable wear face where the axle and kingpin contact the hub.

Installation notes: remove the wheel and steering knuckle, reuse the original kingpin and fasteners where they fit, and check clearance with your existing steering knuckles and axle assemblies. Use proper hex tooling, do not over-torque, and confirm full steering range after installation. Apply thread locker only where you would normally for metal fasteners.

Tuning guidance: moving to an alloy hub can change how the front end feels; after fitting, re-evaluate toe, caster and linkage geometry. Add shims or tweak link lengths if needed to recover the preferred steering characteristics. Regularly inspect contact areas and fasteners for trail use.