Axial SCX10 II Compatible 1.9" 6-Pole Aluminum Crawler Wheel Set AW1906H by GPM  [AW1906H]

1.9" aluminium 6-pole crawler wheel assembly

The AW1906H wheel and tyre set ships as a two piece assembly made for 1/10 scale crawlers that take 1.9" tyres with a 5mm shaft hole and 12mm hex. The CNC-style aluminium wheel uses a six-pole pattern and fits a brass pendulum weight to bias the wheel mass downward, helping the tyre maintain contact at high articulation angles during slow crawling.

The supplied crawler tyre has pronounced longitudinal lugs and a wide contact patch to boost low-speed mechanical traction on rock and technical lines. Source dimensions are outer tyre diameter 115mm, inner diameter 48.26mm (1.9"), tyre width 40mm, and nominal wheel weight 100g. The wheel uses standard 12mm hex mounting and is for scale RC tuning applications.

Installation tips: verify a 5mm axle shaft and 12mm hex on your hubs, check backspace and clearance, and ensure the pendulum weight is oriented downward on the fitted wheel. Supplied as a 2 pcs set.

This set is suited to builds where added wheel mass and deep tread help traction at slow crawl speed; confirm fit before fitting to your hubs and axles.