AXIAL SCX10 II Front and Rear Link Mounts Adjustable 6061-T6 - SCX2008 by GPM  [SCX2008]

AXIAL Racing SCX10 II Aluminium Front/Rear Link Mounts - 1pr set (AX31384) - GPM SCX2008
Price:
NZD$28.32
Brand:
GPM
Model:
SCX2008
GTIN:
4894538078770
Condition:
Brand New
1 Reviews
Write a review
alt="AXIAL Racing SCX10 II Aluminium Front/Rear Link Mounts - 1pr set (AX31384) - GPM SCX2008" title="AXIAL Racing SCX10 II Aluminium Front/Rear Link Mounts - 1pr set (AX31384) - GPM SCX2008"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear Link Mounts - 1pr set (AX31384) - GPM SCX2008" title="AXIAL Racing SCX10 II Aluminium Front/Rear Link Mounts - 1pr set (AX31384) - GPM SCX2008"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear Link Mounts - 1pr set (AX31384) - GPM SCX2008" title="AXIAL Racing SCX10 II Aluminium Front/Rear Link Mounts - 1pr set (AX31384) - GPM SCX2008"

Precision machined link mounts

These front and rear link mounts provide an RC-scale aluminium alternative to the stock plastic mounts used on AXIAL SCX10 II rigs, keeping the original mounting geometry while replacing vulnerable plastic with metal housings for the tie rod ends.

Manufactured from 6061-T6 aluminium, the mounts include several hole positions so you can adjust link angle and choose different mount offsets to suit varied wheelbase setups and steering geometries. The pattern supports incremental tuning without swapping major suspension components.

Installation is simple for an experienced hobbyist: remove the OEM plastic parts, transfer any existing bushings or spacers, and fit the aluminium mounts with the original hardware if compatible. After fitting, verify alignment and check steering for free movement across the full range.

Specifications

  • Item: Front/Rear link mounts, 1pr set
  • Material: 6061-T6 aluminium
  • Model Number: SCX2008
  • Compatibility: AXIAL Racing SCX10 II

A practical metal upgrade for AXIAL SCX10 II builders who want reliable link mount durability and easy adjustability for steering and wheelbase tuning.

This item is compatible with

  • AXIAL SCX10 II

 

Product Reviews
1 Reviews
rating
Great experience and service. I have been very satisified

Are any modifications needed to fit these mounts?

Most installs are direct; you may need to reuse or swap small spacers or bushings depending on your setup, but no major drilling is normally required.

Will aluminium change handling characteristics?

The metal mounts increase rigidity at the link ends and can subtly change steering feedback, especially when you alter tie rod angle via the different holes.

Can I use these with modified wheelbases?

Yes, the multiple mounting positions let you adapt the mounts to slightly different wheelbase configurations without changing axle housings.

How should I check for binding after install?

After installation, move the steering fully lock-to-lock by hand to ensure there is no rubbing or binding and confirm the servo has full travel without interference.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved