AXIAL SCX10 III Adjustable Steering Links Stainless 25pc Kit for JEEP JT GLADIATOR - SCX3L160S by GPM  [SCX3L160S]

AXIAL Racing SCX10 III JEEP JT GLADIATOR Stainless Steel Adjustable Tie Rods - 25pc set - GPM SCX3L160S
Price:
NZD$50.10
Brand:
GPM
Model:
SCX3L160S
GTIN:
4894538344561
Condition:
Brand New
Write a review
alt="AXIAL Racing SCX10 III JEEP JT GLADIATOR Stainless Steel Adjustable Tie Rods - 25pc set - GPM SCX3L160S" title="AXIAL Racing SCX10 III JEEP JT GLADIATOR Stainless Steel Adjustable Tie Rods - 25pc set - GPM SCX3L160S"
alt="AXIAL Racing SCX10 III JEEP JT GLADIATOR Stainless Steel Adjustable Tie Rods - 25pc set - GPM SCX3L160S" title="AXIAL Racing SCX10 III JEEP JT GLADIATOR Stainless Steel Adjustable Tie Rods - 25pc set - GPM SCX3L160S"
alt="AXIAL Racing SCX10 III JEEP JT GLADIATOR Stainless Steel Adjustable Tie Rods - 25pc set - GPM SCX3L160S" title="AXIAL Racing SCX10 III JEEP JT GLADIATOR Stainless Steel Adjustable Tie Rods - 25pc set - GPM SCX3L160S"
alt="AXIAL Racing SCX10 III JEEP JT GLADIATOR Stainless Steel Adjustable Tie Rods - 25pc set - GPM SCX3L160S" title="AXIAL Racing SCX10 III JEEP JT GLADIATOR Stainless Steel Adjustable Tie Rods - 25pc set - GPM SCX3L160S"

Adjustable stainless link set for AXIAL SCX10 III

This 25 piece stainless steel tie rod set is an upgrade designed for AXIAL SCX10 III JEEP JT GLADIATOR owners, model SCX3L160S. Replacing softer plastic links with metal parts helps keep steering geometry stable when you fine tune toe and track on rough trails.

The centre turnbuckle uses opposing threads so a simple rotation changes the overall length of the rod, enabling precise adjustment without disassembling the ends. The stainless material improves dimensional consistency and resists surface corrosion during offroad use.

Installation is straightforward: remove the stock links, fit the new stainless rods and fasten with the provided round head screws. Confirm thread orientation as you adjust and test the vehicle on level ground to dial in alignment before running harder terrain.

Packing includes

  • Steering Tie Rod - 2pcs
  • Suspension Links - 7pcs
  • Stainless Steel Round Head Screw 3x25 - 6pcs
  • Stainless Steel Round Head Screw 3x18 - 4pcs
  • Stainless Steel Round Head Screw 3x16 - 1pcs
  • Stainless Steel Round Head Screw 3x14 - 4pcs
  • Stainless Steel Round Head Screw 3x12 - 1pcs

Original Name / Part No:

AXI234011,AXI234012,AXI234013,AXI234018,AXI234019,AXI234006,AXI234004

Specifications

  • Item: Stainless Steel Adjustable Tie Rods 25pcs set
  • Material: Stainless steel
  • Model Number: SCX3L160S
  • Compatibility: AXIAL Racing SCX10 III JEEP JT GLADIATOR

Choose this kit when you want reliable metal steering links for consistent adjustments; work in small increments and verify steering travel to protect components and tyre wear.

Do these tie rods work with stock AXIAL alignment settings?

Yes, they are sized for the SCX10 III JEEP JT GLADIATOR geometry but you should recheck toe and track after fitting to ensure the same alignment is retained.

Can I tune camber with these links?

These links are intended for steering and wheeltrack adjustment; camber is normally set by axle and suspension geometry rather than tie rod length on this platform.

What tools are recommended for fitting?

A small hex driver set for the screws, pliers for holding ball ends and a thread locker for any joints you want secured are handy to have during installation.

Will these add noticeable weight to my crawler?

Stainless parts are heavier than plastic, but the tradeoff is improved rigidity and repeatable setup; most hobbyists accept the small weight gain for better steering feel.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved