AXIAL SCX30 26mm Shock Upgrade for Ford Bronco - SCX30/26FR by GPM  [SCX30/26FR]

AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR
Price:
NZD$31.01
Brand:
GPM
Model:
SCX30/26FR
GTIN:
4894538411027
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"

Compact 26mm Aluminum Dampers for SCX30

This shock kit is supplied as an aftermarket upgrade for AXIAL SCX30 scale rock crawlers. It includes four 26mm CNC aluminum shocks and three distinct spring rates to refine low-speed traction and suspension response on trails. The set replaces the factory items referenced below and fits front and rear shock locations on compatible models.

The dampers may be used dry or filled with shock oil; oil is not supplied and the small 26mm size makes filling and bleeding simpler with dedicated small-capacity tools. Multiple springs allow quick changes to preload and ride feel without altering the shock housing.

Packing includes

  • Shock 26mm - 4pcs
  • Silver spring (hard) - 4pcs
  • Gold spring (soft) - 4pcs
  • Pivot Ball 1.4x3.2 - 8pcs
  • Pivot Ball 1.4x4.7 - 4pcs
  • Stainless Steel Round Head Screws M1.4x8 - 4pcs
  • Stainless Steel Round Head Screws M1.4x10 - 4pcs
  • O-ring 4x2x1mm - 4pcs

Original Name / Part No:

AXI-3317,AXI-3325

Compatible Models

  • AXIAL 1/30 SCX30 Ford Bronco 4X4 RTR Brushed Rock Crawler-AXI-2048
  • AXIAL 1/30 SCX30 Jeep Wrangler JLU 4X4 RTR Brushed Rock Crawler-AXI-2261
  • AXIAL 1/30 SCX30 Chevrolet K10 4X4 RTR Brushed Rock Crawler-AXI-2260

Fit this kit to tune suspension compliance on AXIAL SCX30 crawlers, swapping springs and checking damper travel and link geometry after installation.

The CNC aluminum bodies offer improved resistance to wear and bending compared with plastic shocks, but like all small-scale parts they should be inspected for dents and thread wear after hard sessions.
O-rings can harden over time; check seals after extended use and replace if you notice oil leaks or sticky damping. Keeping spare O-rings on hand is advised.
The package uses stainless steel round head screws which provide good corrosion resistance for general outdoor trail conditions.
Surface finishes on springs can wear over time; avoid abrasive contact during installation and inspect springs for nicks that could affect performance.
Smaller parts have less material to absorb extreme impacts; careful routing and avoiding direct strikes reduces the chance of damage on tight trails.
Perform a quick check after each outing and a more detailed inspection every few sessions, paying attention to seals, threads, and spring condition.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved