Axial SCX6 Gearbox Armor Upgrade for Drivetrain Stiffness - JR-SCX609-TI by Jazrider  [JR-SCX609-TI]

Axial 1/6 SCX6 Jeep 7075 Aluminum Front/Rear Gearbox Cover (Titianum)
Price:
NZD$25.27
Brand:
JAZRIDER
Model:
JR-SCX609-TI
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Overview of the SCX6 gearbox upgrade

Designed for the 1/6 Axial SCX6 Jeep platform, this aftermarket gearbox cover is an alloy upgrade (model JR-SCX609-TI) machined from 7075 aluminum. The cover adds a rigid enclosure to help protect internal drivetrain components during trail and technical crawling sessions.

Sized to mate with Axial SCX6 scale assemblies, the component is offered as a replacement for the stock cover. Basic gearbox teardown is required for front or rear fitting and the original mounting hardware is typically reused; always verify clearance with your existing drivetrain layout before finishing assembly.

From a setup perspective, a metal gearbox cover can reduce gearbox flex and assist in preserving gear alignment under load. It suits hobby trail driving and technical crawls where extra stiffness around the gearbox is helpful and complements standard drivetrain service and bearing upgrades.

How does this cover affect gear alignment and tuning?

By stiffening the gearbox area the cover can help maintain pinion-to-spur alignment under load, which may reduce the need for frequent mesh adjustments during aggressive crawling.

Will adding this change drivetrain vibration or noise?

A stiffer housing can alter vibration characteristics; you may notice a small change in tone but the primary benefit is improved alignment and reduced flex.

Any tuning steps after installation?

After fitting, recheck gear mesh and bearing alignment, then test under load. Fine tune motor pinion position or shims if you detect binding or increased noise.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved